You get marble that looks like it did when your home was first built. No more dull spots from years of humidity damage. No more worrying about whether that expensive stone is slowly deteriorating.
Professional steam cleaning removes the bacteria and buildup that regular mopping can’t touch. Your marble walls, shower surfaces, and backsplashes regain their natural luster without harsh chemicals that could cause long-term damage.
The difference is immediately visible. Marble that’s been properly steam cleaned reflects light the way it should. Colors appear richer. The surface feels smooth again instead of rough or chalky.
We’ve been restoring historic marble in Bellerose and throughout Nassau County since 1998. We’re the company The New York Times featured for our expertise in bringing century-old floors back to life.
What makes us different is simple: we’re owner-operated. That means every project gets direct attention from someone who’s been doing this for over 25 years. No subcontractors. No cutting corners.
Bellerose’s historic homes built in the 1940s and 1950s present unique challenges. These properties often have original marble installations that require specialized knowledge to restore properly. We’ve seen every type of damage that decades of Long Island living can cause to natural stone.
First, we assess your marble’s condition and age. Historic marble requires different handling than newer installations. We test a small area to determine the right temperature and pressure settings.
Our steam cleaning process uses controlled temperatures that eliminate bacteria and buildup without causing thermal shock to the stone. We work in sections, ensuring each area is properly cleaned and immediately dried to prevent moisture penetration.
After steam cleaning, we inspect for any etching or damage that needs additional attention. If needed, we can hone and polish specific areas to restore uniform appearance. Finally, we apply appropriate sealers to protect against future damage.
Ready to get started?
Your steam cleaning service includes thorough assessment of all marble surfaces, controlled-temperature cleaning that won’t damage historic stone, and immediate drying to prevent moisture damage.
We clean marble walls, shower surrounds, backsplashes, and any other marble surfaces in your Bellerose home. Each surface type gets specific attention based on its location and exposure to moisture and daily use.
Bellerose homeowners particularly benefit from our understanding of how Long Island’s humidity affects marble over time. Many homes in the area were built when marble installation techniques were different, requiring specialized restoration approaches that preserve the original character while ensuring modern durability.
Steam cleaning can be safe for marble, but only when done with proper equipment and expertise. Commercial-grade steam cleaners that reach over 300 degrees can cause thermal shock, leading to cracks and surface damage.
We use residential-grade steam equipment with precise temperature control, typically staying below 250 degrees. More importantly, we understand how different types of marble react to steam cleaning based on their age, composition, and current condition.
Before any steam cleaning, we test a small, inconspicuous area to ensure your specific marble can handle the process safely. If your marble shows signs of existing stress or contains certain minerals, we’ll recommend alternative cleaning methods that achieve the same results without risk.
For most Bellerose homes, professional steam cleaning every 12-18 months is sufficient for marble walls and shower surrounds. High-use shower areas might benefit from cleaning every 6-12 months, especially if you have hard water.
The frequency depends on several factors: how often the shower is used, your home’s ventilation, and whether you’re dealing with original marble from the 1940s-50s or newer installations. Older marble often needs more frequent professional attention because it may not have been sealed with modern products.
Between professional cleanings, regular maintenance with pH-neutral cleaners and proper drying after use will extend the time between steam cleaning sessions. We’ll give you specific recommendations based on your marble’s condition and your household’s usage patterns.
Steam cleaning alone won’t remove etching or hard water spots from marble surfaces. These issues require mechanical restoration through honing and polishing processes that actually reshape the marble surface.
However, steam cleaning is often the first step in addressing these problems. It removes all surface buildup, soap scum, and mineral deposits so we can clearly see the extent of any etching or damage underneath.
If your marble has etching from acidic cleaners or water spots from years of mineral buildup, we can address both the cleaning and restoration in the same service call. Steam cleaning prepares the surface, then we use diamond abrasives to remove the damaged layer and restore the marble’s natural shine.
Home steam cleaners typically lack the power and precision needed for effective marble cleaning. They often can’t reach the temperatures necessary to eliminate bacteria and deep-seated buildup, or they run too hot and risk damaging the stone.
Professional equipment allows us to control temperature, pressure, and steam volume precisely. We also use specialized attachments designed for natural stone surfaces that distribute steam evenly without concentrating heat in one spot.
Most importantly, we know when steam cleaning isn’t the right approach. If your marble has existing cracks, certain mineral compositions, or inadequate sealing, steam cleaning could cause more harm than good. We’ll identify these issues before starting work and recommend the safest, most effective cleaning method for your specific situation.
Most marble steam cleaning projects in Bellerose homes take 2-4 hours, depending on the size of the area and the extent of buildup we’re removing. Shower surrounds typically take 1-2 hours, while larger marble wall installations may require a full morning or afternoon.
You can typically use your shower again within 2-3 hours after we finish. We ensure all surfaces are completely dry before leaving, and any sealers we apply are designed for quick curing in bathroom environments.
If we discover during cleaning that your marble needs additional restoration work like honing or polishing, we’ll discuss timeline options with you. Some restoration processes require 24-48 hours of cure time, but we’ll always explain exactly what to expect and provide alternatives if you need immediate access to the space.
Proper steam cleaning shouldn’t damage grout, but the wrong technique or temperature can cause grout to crack, discolor, or crumble. This is especially true with older grout installations common in Bellerose’s historic homes.
We adjust our steam cleaning approach based on your grout’s age and condition. Older cement-based grouts require lower temperatures and shorter exposure times than modern epoxy grouts. We also avoid directing steam directly at grout lines when possible.
If we notice grout damage during the cleaning process, we can address it immediately. We offer grout repair and resealing services, and often recommend updating grout in historic installations to modern materials that better resist moisture and daily wear while maintaining the original appearance.
Local Resources
Useful Links
Other Services we provide in Bellerose
