You’re not looking at a floor that’s “good enough.” You’re looking at marble that looks like it did before decades of foot traffic, acidic cleaners, and settling took their toll. The etching is gone. The dull spots have depth again. The cracks are stable.
If your floor is original to your home—especially if your home dates back to the early 1900s or earlier—you already know how rare that material is. It’s not something you replace. It’s something you bring back.
That’s what we do. We work on the floors that need the most attention. The ones with water damage in the grout lines. The ones with stains that have been there for years. The ones where the surface has worn down to the point that you’re not sure it’s salvageable. Most of those floors are. And when they come back, they don’t just look better—they feel like part of the house again.
High Definition Marble Restoration Inc has been restoring marble floors across Long Island for over 25 years. We’re not a franchise. We don’t subcontract the work. The person you talk to is the person who shows up.
Village of the Branch has some of the most well-maintained historic homes in Nassau County. Median home values here sit around $600,000, and many properties date back to the mid-1960s or earlier—some much earlier. That means original marble, original tile, and original problems that need someone who actually knows how to work with aged stone.
We’ve worked with clients who’ve owned their homes for decades and clients who just bought a historic property and realized the floors need more than a cleaning. Either way, you’re dealing with materials that don’t respond well to guesswork. We don’t guess.
You’ll get a response within 24 hours. We’ll schedule a time to come out, look at the floor, and give you a written proposal that breaks down exactly what we’re doing and what it costs. No surprises later.
Once we start, the process depends on the condition of your floor. If it’s etched or stained, we’re grinding down the damaged surface layer and re-polishing from scratch. If there’s structural movement or cracks, we stabilize and fill those first. If the grout is failing, we address that before we touch the stone. Every floor is different, but the approach is the same: fix what’s broken, restore what’s worn, and protect it when we’re done.
Most residential jobs take one to two days. You’ll have access to the space the same day we finish. The floor is sealed, polished, and ready to handle normal use right away. No curing time. No week-long waits.
Ready to get started?
We handle everything from surface polishing to full structural repair. That includes grinding out etch marks, removing stains that have soaked into the stone, re-leveling uneven sections, filling cracks, replacing damaged grout, and applying a penetrating sealer that won’t yellow or wear off in six months.
In Village of the Branch, we see a lot of marble that’s original to homes built in the 1920s through 1960s. That stone has usually seen decades of the wrong cleaning products—vinegar-based solutions, acidic bathroom cleaners, bleach. All of that eats away at the calcium carbonate in the marble and leaves behind dull spots that don’t buff out with regular cleaning. We remove that damaged layer and bring the surface back to a factory finish.
We also offer concrete restoration and polishing, which is newer to our service lineup but uses a lot of the same techniques. If you’ve got a concrete floor that’s stained, pitted, or just ugly, we can grind it smooth and polish it to a finish that rivals stone. It’s a cost-effective option for basements, garages, and commercial spaces.
It depends on the size of the floor and what kind of damage we’re dealing with. A straightforward polish on a small bathroom might run a few hundred dollars. A full restoration on a 500-square-foot entryway with cracks, stains, and grout issues will cost more.
What we can tell you is that restoration almost always costs 70 to 80 percent less than replacement. And replacement doesn’t make sense if your marble is original to a historic home. You’re not going to find the same material again. Even if you could, the labor to remove the old floor, prep the subfloor, and install new stone would run into the tens of thousands.
We give you an itemized proposal before we start. You’ll know exactly what you’re paying for, and there won’t be any add-ons or surprise fees when we’re done.
Yes. Cracks usually happen because the subfloor has settled or shifted over time. That’s common in older homes, especially in areas with clay soil or homes that were built before modern foundation standards.
We start by stabilizing the crack so it doesn’t spread. Then we fill it with a color-matched epoxy or resin that bonds to the stone. Once it’s cured, we grind the surface flat and polish it so the repair blends in with the rest of the floor. You’ll know where the crack was if you’re looking for it, but most people don’t notice.
If the floor is uneven because of subfloor issues, we can sometimes grind down the high spots to level things out. If the problem is more severe, we’ll let you know. We’re not going to tell you a floor is fixable if it’s not.
Most residential projects take one to two days. Small bathrooms or entryways might be done in a few hours. Larger spaces or floors with significant damage take longer.
The process itself isn’t slow—it’s just thorough. We’re not buffing the surface and calling it done. We’re grinding, honing, polishing, and sealing. Each step has to be completed properly or the next step won’t work.
You’ll have full use of the floor the same day we finish. The sealer we use cures on contact, so there’s no waiting period. You’re not dealing with a week of plastic sheeting and caution tape.
No. We contain the work area and use equipment with built-in dust extraction. You’re not going to have marble dust all over your furniture or HVAC system.
The process does involve water, but we control that with vacuums and containment barriers. We’re not flooding your floors or soaking into your subfloor. Everything is cleaned up before we leave, and we move any furniture that needs to be moved.
If you’ve had work done in your home before, you know how disruptive construction can be. This isn’t that. We’re in and out fast, and the mess is minimal.
Polishing is surface-level. It brings back some shine, but it doesn’t fix etching, stains, or scratches. If your floor just looks a little dull, polishing might be enough.
Restoration goes deeper. We’re removing the damaged layer of stone—usually a few millimeters—and rebuilding the surface from scratch. That’s what fixes etch marks from acidic spills, stains that have soaked in, and scratches that go below the polish layer.
If you’re not sure what your floor needs, we’ll tell you during the estimate. We’re not going to upsell you on a full restoration if a polish will do the job. But if the damage is more than cosmetic, polishing won’t fix it.
We work on marble, travertine, limestone, terrazzo, and concrete. Each material has different hardness levels and responds differently to grinding and polishing, but the fundamentals are the same.
We don’t work on porcelain or ceramic tile. Those materials don’t restore the same way natural stone does, and we’d rather refer you to someone who specializes in that than do a mediocre job.
If you’ve got a stone floor and you’re not sure what it is, we can identify it when we come out. A lot of homeowners think they have marble when they actually have limestone or travertine. It doesn’t change much about the process, but it does affect which products we use and how we seal it.
Local Resources
Useful Links
