You’ll walk on marble that looks the way it did when your home was built. The etching from years of wrong cleaners disappears. The dull, worn-down surface becomes reflective again. Those water rings and mineral deposits from Long Island’s hard water—gone.
Most homes in Bellerose Terrace were built before 1939, and that marble has been through decades of foot traffic, harsh products, and well-meaning but damaging DIY attempts. You’ve probably tried everything to bring it back yourself.
Here’s what changes: the embarrassment when guests come over ends. The frustration of cleaning floors that never look clean stops. You get floors that actually reflect light again, that feel smooth under your feet, that make you proud of your home. And you accomplish all of this in one to two days, for 60-80% less than replacement would cost.
We’ve worked exclusively in Nassau and Suffolk County since 1998. We’re not general contractors who dabble in stone. We’re specialists in historic marble restoration—the older and more damaged your floors, the better suited we are to handle them.
Our owner oversees every project personally. No subcontractors, no handoffs, no surprises. We’ve been featured in the New York Times for our work, and the Garden City Hotel has trusted us exclusively for over 16 years.
Your Bellerose Terrace home likely has marble installed using techniques that don’t exist anymore, possibly from quarries that have closed. We understand how these floors were built, what they’ve been through, and exactly how to restore them without causing further damage.
We start with a free on-site assessment where you show us the damage—etching, stains, cracks, dullness, whatever’s bothering you. We give you transparent pricing right there, before any work begins.
Once you’re ready to move forward, we complete 99% of the work right in your home using advanced water-based methods that eliminate dust. We’re not grinding and creating a mess throughout your house. We repair cracks and chips first, then address the etching and staining that’s accumulated over the years.
The actual marble polishing brings back the original finish through a multi-step process we’ve refined over 35 years. We’re removing damage at the surface level and rebuilding the shine your floors once had. Finally, we seal everything properly to protect against future damage—including guidance on the right products to use so you don’t accidentally cause etching again.
Most projects finish in one to two days. You can walk on your floors immediately after we’re done.
Ready to get started?
You’re getting comprehensive marble floor restoration that addresses every issue your floors have developed. We handle etching from acidic cleaners—the dull spots where lemon juice, vinegar, or standard household cleaners made contact. We remove hard water stains and mineral deposits that Long Island’s water leaves behind. We repair cracks and chips that have appeared over decades of settling and use.
The marble refinishing process brings back the reflective surface you remember or have seen in old photos of your home. We’re not adding a coating that will wear off. We’re restoring the actual marble surface to its original polished state.
In Bellerose Terrace, where 76% of homes were built in 1939 or earlier, your marble has likely survived nearly a century. It’s seen countless cleanings with products that weren’t meant for natural stone, absorbed moisture from humid Long Island summers, and endured freeze-thaw cycles that create microscopic damage. Our marble polishing services account for all of this accumulated wear.
You also get education on proper marble floor care moving forward—which products are safe, how to clean without causing new etching, and when to call us back for maintenance polishing down the road.
Professional marble restoration typically costs between $800 and $2,400 for an average residential project. Replacement runs $3,000 to $8,000 or more—you’re looking at 60-80% savings by restoring instead of replacing.
The math gets even better when you factor in the disruption. Replacement means tearing out your existing marble, disposing of it, sourcing new stone, and installing it—a process that takes weeks and leaves your home torn apart. Restoration happens in one to two days with minimal disruption.
Here’s what most homeowners in Bellerose Terrace don’t realize: your century-old marble is likely higher quality than what you’d install new today. Those old quarries produced denser, more durable stone. You’re not just saving money by restoring—you’re keeping better material.
Yes. Etching happens when acid makes contact with marble and literally dissolves the surface, leaving dull spots. Water stains are mineral deposits that Long Island’s hard water leaves behind. Both are removable through proper marble restoration techniques.
We’re not covering up the damage—we’re removing it. The process involves carefully abrading away the damaged surface layer and re-polishing the marble underneath. For etching, we’re taking the floor down to undamaged stone. For water stains, we’re removing the mineral deposits and then polishing the surface they were sitting on.
The key is knowing how much material to remove and how to re-polish without creating uneven spots or new damage. That’s where our 35 years of experience matter. We’ve seen every type of etching and staining that occurs in Long Island homes, and we know exactly how to address each one.
Most residential marble restoration projects in Bellerose Terrace take one to two days from start to finish. You can walk on your floors and use them normally as soon as we’re done—there’s no curing time or waiting period.
The timeline depends on the size of your floors and the extent of damage. A small bathroom with minor etching might be done in a few hours. A large foyer and hallway with significant staining, cracks, and years of buildup will take longer.
During your free assessment, we’ll give you an exact timeframe based on what we see. We work efficiently because we’ve refined our process over decades, but we never rush. Our owner oversees every project personally to ensure the work is done right, even if it takes an extra few hours.
No. We complete 99% of marble restoration work using advanced water-based methods that eliminate dust. This isn’t the old way of dry-grinding stone and creating a mess that spreads through your entire house.
Our equipment uses water to control dust at the source during the polishing process. You’re not going to find stone dust on your furniture, in your vents, or throughout rooms we’re not even working in.
This matters especially in Bellerose Terrace’s historic homes, where dust can settle into original woodwork, crown molding, and other architectural details that are difficult to clean. We respect your home and work in a way that contains the mess to the immediate work area.
Restoration is not only safe—it’s the best option for preserving historic marble. We specialize in floors from the 1930s and earlier, and we understand how these installations differ from modern ones.
Old marble was often set using different techniques and materials than what’s used today. The stone itself is frequently from quarries that no longer exist, meaning if you damage it or replace it, you can’t get an exact match. Our restoration methods account for these differences.
We’ve worked on marble floors throughout Nassau County’s historic properties for over two decades. The Garden City Hotel has trusted us exclusively for 16 years. We know how to handle antique stone without causing stress cracks, uneven surfaces, or other damage that can occur when someone applies modern techniques to old installations. Your floors have survived a century—our job is to help them survive another one.
Use pH-neutral cleaners specifically made for natural stone. Never use vinegar, lemon juice, ammonia, or standard household cleaners—these contain acids that cause etching. Wipe up spills immediately, especially anything acidic like wine, coffee, or juice.
We seal your marble as part of the restoration process, which provides protection against staining. But sealing doesn’t make marble indestructible. You still need to clean properly and address spills quickly.
For daily cleaning, a damp microfiber mop with stone-safe cleaner is all you need. For deeper cleaning, we can recommend specific products that won’t damage your newly restored surface. Long Island’s hard water means you’ll want to dry your floors after mopping to prevent new mineral deposits from forming. We’ll walk you through all of this after your restoration is complete, and we’re available if questions come up later.
Local Resources
Useful Links
