You’re looking at floors that have been there for decades, maybe a century. They’re dull now, scratched, stained in places you can’t seem to fix. You’ve tried the usual cleaners and they either did nothing or made it worse.
Here’s what changes after a real restoration. The surface comes back—not just clean, but actually reflective again. The depth in the stone returns. You see the veining clearly, the way it looked when the house was new.
Most jobs take less than two days. You’re not living in a construction zone for weeks. And you’re not ripping out irreplaceable materials that you’ll never get back. Once those original floors are gone, they’re gone. Restoration keeps them, protects your property value, and costs a fraction of what replacement would run you.
This isn’t about making old floors “good enough.” It’s about bringing them back to what they were—and in a lot of cases, better than they’ve looked in fifty years.
We’ve been restoring floors in Nassau County since 1998. We’re owner-operated, which means the person you talk to is the person overseeing your job. No subcontractors. No handoffs.
We were featured in the New York Times back in 2001 for this work. That was over two decades ago, and we’re still here doing the same thing—bringing historic floors back to life in homes across Manhasset, Great Neck, and the surrounding North Shore.
Manhasset has some of the most beautiful pre-war homes on Long Island. A lot of them still have original marble floors from the Gold Coast era. Those floors weren’t installed the way modern materials are. The stone is different. The setting methods are different. You need someone who actually knows how to work with them. That’s what we do.
First, we come out and look at your floors in person. No guessing over the phone. We need to see the condition of the stone, what kind of damage we’re dealing with, and what the realistic outcome is. You get a free quote with transparent pricing before anything starts.
Once we’re on site, we start with a deep clean to remove years of buildup—dirt, wax, old sealers, whatever’s been applied over time. Then we move into honing, which is where we actually remove scratches, etching, and surface damage. This step uses progressively finer abrasives to smooth the stone without taking off more material than necessary.
After honing comes polishing. This is where the stone starts to shine again. We’re not talking about a topical coating that wears off in six months. We’re bringing out the natural reflectivity in the marble itself. The finish is in the stone, not on top of it.
Finally, we seal the surface to protect it from staining and make daily maintenance easier for you. The whole process usually wraps up in under two days for most residential floors. You’re not displaced from your home. You’re just getting your floors back.
Ready to get started?
You’re getting a complete marble floor restoration—not just a cleaning or a quick polish. That means we’re addressing the actual damage in the stone, not covering it up.
We handle everything from bathroom floor restoration to large entryway marble that’s seen a century of foot traffic. If you’ve got etching from acidic cleaners (which happens constantly on Long Island—hard water and the wrong products are a brutal combination), we remove that. If there are cracks or chips, we repair them before we start the refinishing process.
We also work with concrete now. If you’ve got polished concrete floors or you’re thinking about it as an option, that’s something we can walk you through. It’s a newer addition to what we offer, but it’s the same approach—high-end restoration work on materials that need specialized knowledge.
Manhasset homeowners deal with unique challenges. The salt air, the hard water, the age of the homes—it all affects how stone holds up over time. We’ve been working in Nassau County long enough to know what works here and what doesn’t. You’re not getting a generic approach. You’re getting a process that’s built for the conditions your floors actually live in.
Restoration typically costs between $2 and $3 per square foot for most residential projects in the Manhasset area. Full replacement with new marble runs anywhere from $70 to $190 per square foot when you factor in demolition, disposal, materials, and installation.
If you’ve got 200 square feet of marble flooring, you’re looking at around $400 to $600 for restoration versus $14,000 to $38,000 for replacement. The math is pretty straightforward.
The bigger point is that replacement means you lose the original floors. If your home was built in the 1920s or earlier, those floors are part of the property’s character and value. Buyers pay a premium for authentic, well-maintained historic features. Restoration protects that investment. Replacement erases it.
Yes. Etching is one of the most common problems we see, especially on Long Island where hard water makes people reach for acidic cleaners that destroy marble.
Etching happens when acid eats into the surface of the stone. It leaves dull spots, water marks, or cloudy areas that won’t buff out with regular cleaning. Once the stone is etched, the damage is physical—you can’t just wipe it away.
We remove etching by honing the surface down to fresh stone, then polishing it back to a reflective finish. The process takes out the damaged layer and brings the marble back to its original clarity. How deep we need to go depends on how severe the etching is, but in most cases, it’s completely reversible. Your floors won’t look “fixed”—they’ll look like the etching never happened.
Most residential marble restoration projects take less than two days. Smaller areas like a bathroom floor might be done in a few hours. Larger spaces—entryways, foyers, hallways—usually wrap up within one to two full days depending on square footage and the condition of the stone.
The timeline depends on how much damage we’re correcting. If the marble just needs polishing and sealing, that’s faster. If we’re removing deep scratches, repairing cracks, or dealing with heavy etching, it takes longer.
We don’t rush the process. Marble restoration isn’t something you can shortcut and get good results. But we also don’t drag it out. You’ll know the timeline upfront, and we stick to it. You’re not living in a construction zone for a week. You’re getting your space back quickly, and the floors are immediately usable once we’re done.
Absolutely. In fact, that’s our specialty. The older and more historic the floor, the better suited we are to handle it.
Century-old marble was installed differently than modern stone. The materials are different, the setting beds are different, and the stone itself often came from quarries that aren’t even operating anymore. You can’t treat those floors the same way you’d approach something installed ten years ago.
We’ve been restoring historic floors in Nassau County since 1998. Manhasset, Garden City, Great Neck—these areas are full of Gold Coast-era homes with original marble that’s been there since the 1920s or earlier. We know how to work with antique stone without damaging it further. The worse the floor looks when we start, the more dramatic the result. If your floors have been neglected for decades, that’s not a problem. That’s exactly the kind of project we’re built for.
The owner oversees every project personally. We don’t use subcontractors. When you call, you’re talking to the person who’s going to be managing your job from start to finish.
That matters because marble restoration requires specialized knowledge. You can’t hand this work off to a general crew and expect consistent results. Stone can be ruined very easily by someone who doesn’t know what they’re doing—wrong abrasives, wrong techniques, wrong products. We’ve seen it happen more times than we can count.
Owner-operated means you get direct accountability and quality control. It also means you’re working with someone who has 25+ years of experience doing this specific type of work. No learning curve. No surprises. Just someone who knows exactly how to bring your floors back and has been doing it successfully in this area for over two decades.
Polishing is one step in the restoration process, but it’s not the whole thing. A lot of cleaning companies offer “marble polishing” and what they’re really doing is applying a topical coating or buffing the surface. That might add some shine temporarily, but it doesn’t fix underlying damage.
Actual restoration means we’re addressing the stone itself—removing scratches, repairing chips, eliminating etching, and then honing and polishing the marble to bring back its natural finish. The shine you see after a real restoration is coming from the stone, not from a product sitting on top of it.
If your floors are just dirty or slightly dull, polishing might be enough. But if you’re dealing with visible damage, stains, or years of neglect, you need full restoration. We’ll tell you honestly what your floors need during the free quote. We’re not going to upsell you on work that isn’t necessary, but we’re also not going to polish over problems that need to be fixed first.
Local Resources
Useful Links
