Your marble floors look the way they did when your house was built. The etching from decades of wrong cleaning products disappears. The dull, worn traffic patterns where generations walked—gone.
You’re not covering up damage or applying temporary fixes. You’re reversing it. The calcium carbonate structure gets rebuilt. The surface gets re-leveled. The original finish comes back.
This matters in East Shoreham, where 40% of homes were built before the 1940s. Your floors aren’t just old—they’re irreplaceable. Modern marble doesn’t match the quality or character of what’s already in your home. Restoration protects that authenticity while giving you a surface that actually functions the way it should.
You get floors that reflect light properly again. Surfaces that don’t absorb stains. A finish that holds up to real use. And you keep the original material that adds value to your property—not some replacement that looks wrong for the period.
We focus on the floors other companies walk away from. The 100-year-old marble with settling cracks and foundation issues. The bathroom floors with decades of etching. The entry halls where foot traffic has worn through the finish completely.
We’re owner-operated, which means the person who quotes your job is the same person overseeing the work. No handoffs. No miscommunication. Just direct accountability from start to finish.
We’ve spent 18 years working in Nassau and Suffolk County homes. We understand how East Shoreham’s historic housing stock behaves—the settling patterns, the original installation methods, the specific challenges that come with pre-war construction. That context matters when you’re trying to restore something without damaging it further.
The New York Times featured our work in 2001. We’re not new to this, and we’re not experimenting on your floors.
We start with a free quote and a transparent assessment of what your floors actually need. You’ll know the price before any work starts. No surprises.
Then we protect everything around the work area. Masking and containment aren’t optional steps—they’re part of the process. Your home stays clean.
The restoration itself involves removing the damaged surface layer, re-leveling the marble, and rebuilding the finish. We’re not buffing or coating. We’re using diamond abrasives to physically remove etching, scratches, and wear patterns. Then we hone and polish the surface back to its original specification.
For historic floors, this sometimes means addressing structural issues first—re-setting loose sections, filling settling cracks properly, stabilizing the foundation. You can’t polish a floor that’s moving.
The timeline depends on square footage and condition, but most residential projects finish within a few days. You’ll see progress as we work through the grits—the surface goes from rough to smooth to reflective in visible stages.
When we’re done, your floor looks like it did when it was new. Not “better than before”—actually new. And we clean up completely before we leave.
Ready to get started?
You get a full restoration—not a surface treatment. That means crack repair, lippage removal, deep etching correction, and complete refinishing. We handle the structural issues that cause problems, not just the cosmetic ones.
East Shoreham’s older homes often have marble in bathrooms, entryways, and kitchens. These are high-moisture, high-traffic areas where damage accumulates differently. Bathroom floor restoration requires understanding how water exposure affects calcium-based stone. Kitchen marble needs a finish that resists etching from acidic spills. We adjust the process based on the room and how you actually use the space.
We also offer concrete restoration and polishing now—same approach, different material. If you have original concrete floors or newer polished concrete, we can restore or refinish those too.
The goal isn’t to sell you services you don’t need. It’s to fix what’s broken and protect what’s still good. Sometimes that’s a full restoration. Sometimes it’s targeted repair and a maintenance plan. We’ll tell you the difference.
Yes. That’s specifically what we do.
Old marble isn’t damaged beyond repair—it’s just damaged beyond what most people know how to fix. The stone itself is still structurally sound in most cases. The problems you’re seeing—dullness, etching, scratches, wear patterns—are surface issues. They go down a few millimeters at most.
We remove that damaged layer using diamond abrasives, then rebuild the finish. The process is similar to how the floor was originally finished, just with better tools. You’re not covering anything up or applying a coating. You’re physically restoring the marble to its original state.
The exception is when there’s actual structural failure—broken sections, severe foundation settling, or complete delamination. In those cases, we address the structural problem first, then restore the surface. But even then, replacement usually isn’t necessary. We reset and stabilize the existing marble.
Your 100-year-old floor is higher quality than most new marble you’d buy today. Restoring it makes both preservation and financial sense.
Most residential projects take two to four days, depending on square footage and condition.
A small bathroom might be one day. A large entry hall or kitchen could be three. If we’re doing multiple rooms or dealing with significant structural repairs, it extends from there.
The work itself moves through stages—grinding, honing, polishing. Each stage requires multiple passes with progressively finer abrasives. You can’t rush it without compromising the result. The marble needs to be completely level before you can create a reflective finish.
We’ll give you a specific timeline when we quote the job. That estimate accounts for the actual condition of your floors, not just the square footage. A 200-square-foot floor in good shape takes less time than a 100-square-foot floor with severe etching and cracks.
You can usually stay in the house during the work. We contain dust and noise to the work area. But the floor itself needs to stay clear until we’re finished.
Almost always, it’s acidic cleaners reacting with the calcium carbonate in the marble.
Vinegar, lemon-based products, most commercial floor cleaners—they’re all acidic. When acid touches marble, it dissolves the surface. That’s a chemical reaction, not wear and tear. The result is etching: dull spots that feel slightly rough and don’t reflect light properly.
This happens slowly over years. You don’t notice it day to day. But eventually, the entire floor looks hazy, especially in high-traffic areas where cleaning happens most often.
The other common cause is abrasive damage—grit and dirt acting like sandpaper under foot traffic. East Shoreham’s proximity to the water means more sand and salt getting tracked inside. If that debris isn’t swept up before people walk on it, it scratches the marble surface.
Both problems are fixable. Etching requires removing the damaged layer and re-polishing. Scratches require leveling and refinishing. But you also need to change how you’re cleaning the floors, or the damage just comes back. We’ll tell you exactly what products are safe and what aren’t.
Restoration costs a fraction of replacement and keeps the original material that adds value to your home.
Replacing marble means demo, disposal, new material, new installation, and dealing with the disruption of a full floor replacement. You’re looking at weeks of work and costs that run $20-40 per square foot or more, depending on the marble quality.
Restoration typically costs significantly less and finishes faster. You’re working with what’s already there. No demolition. No disposal fees. No waiting for new material to arrive. And you keep the original floors that match your home’s period and character.
In East Shoreham, where historic homes command premium prices, original marble floors are a selling point. Buyers looking at pre-war homes expect authentic materials. Replacing your marble with modern alternatives actually hurts your property value.
There’s also the practical reality that old marble is often better quality than what you’d buy new. The quarries that produced stone 100 years ago were pulling from different veins—denser material, better color consistency, fewer impurities. You can’t replicate that now.
Restoration makes sense unless the marble is structurally failed beyond repair. And that’s rare.
We specialize in marble, but we also restore other natural stone and concrete.
Marble is our primary focus because it requires specific knowledge. It’s a calcium-based stone, which means it reacts differently to chemicals and abrasives than silica-based stones like granite. The restoration process has to account for that.
But the same principles apply to limestone, travertine, and terrazzo—all calcium-based materials common in historic East Shoreham homes. We work on those regularly.
We’ve also added concrete restoration and polishing. If you have original concrete floors or newer polished concrete that needs refinishing, we handle that too. The equipment and process overlap with stone restoration.
What we don’t do is porcelain or ceramic tile. Those are manufactured materials with different properties. They require different tools and techniques. We stick to what we know.
If you’re not sure what type of floor you have, we can identify it during the quote. Sometimes what looks like marble is actually limestone or travertine. The visual difference isn’t always obvious, but the restoration approach changes.
Use pH-neutral cleaners only, sweep regularly, and address spills immediately.
The biggest mistake people make is using the wrong cleaning products. Anything acidic will etch the marble—that includes vinegar, lemon, most commercial floor cleaners, and even some “natural” products. You need pH-neutral stone soap. We’ll recommend specific products when we finish your floors.
Sweeping matters more than you’d think. Sand, dirt, and grit act like sandpaper under foot traffic. If you sweep or vacuum regularly, you remove that abrasive debris before it scratches the surface. This is especially important in East Shoreham homes near the water, where sand gets tracked inside constantly.
Spills need to be wiped up quickly, particularly acidic things like wine, coffee, or citrus. The longer they sit, the more etching occurs. Blot them up—don’t wipe them around—and rinse the area with clean water.
You don’t need to seal marble in most cases. Sealer doesn’t prevent etching (that’s a chemical reaction happening on the surface). It only slows stain absorption. For floors, the polished finish itself provides protection. We’ll tell you if your specific situation requires sealing.
Over time, even with proper care, high-traffic areas will need re-polishing. That’s normal. But you’re looking at years between maintenance, not months. And re-polishing is much simpler than full restoration.
Local Resources
Useful Links
